Tired of waking up on the floor in the morning because your air bed leaks the air in you during the night? Indeed, inflatable air beds are one of the most comfortable options on the market, despite the fact that they are extinguished so often during use.
Would you like to skip disappointment? Read our complete air bed guide, and we’ll help you choose someone who hasn’t lost the air.
So why exactly does your mattress lose the air in it?
There are several reasons why this could happen to you. We will discuss these reasons and take them a step further by providing you with a few tips to prevent beds from going out in the future. We want to help you get back to that good night’s sleep that you miss.
Reason 1: Improper Use
You’ve had a busy day and it’s time to go to bed. The last thing you want to do is read the full instruction manual on how to properly inflate your bed. The problem is that if you ignore the steps outlined in the manual, there is a good chance your bed will not work at the best performance level.
Do yourself a favour and take the time to read, understand and apply the steps listed; They were placed there for a reason. Doing so will not only help you maintain the air pressure in your inflatable bed, but also prolong its life.
Reason 2: Temperature
It’s no secret that it’s colder in the evening. When the sun goes down and the room temperature drops, the air inside the mattress intensifies. This is due to a fancy scientific equation known as the Ideal Gas Act.
NBC Sports used this law to determine how it affects football in NFL games, but the same concept applied to your air mattress. During an experiment, people in Sports Science exposed the balls to 10-degree temperatures for sixty minutes, during which time the ball went from 13.5 PSI to 11 PSI.
While this is a fun situation, the point is that if your bed is exposed to cold weather during the night, it will lose some pressure and you will feel extinguished when you wake up.
Reason 3: The Pumping Predicament
In an ideal world, when you’re done filling your bed with a manual pump or an electric external pump, you can turn it off without losing air. Unfortunately, since there is no complete air tightness in the beds where external pumps are used on the market, it is impossible to inflate the bed without losing air.
Most of each inflatable bed uses an external pump to fill with air, and some air is lost after the pump is removed. Fortunately, given this ongoing problem, some products that use built-in pumps have been made.
These options are the easiest to pump and maintain. They fill with air in four to six minutes, making it easier for you to prepare our loved ones for the night.
Reason 4: Small holes
Your air mattress is not the most robust product you’ve ever bought. Most of the time, these mattresses are made of a thin material that tends to be punctured, strained and torn after continuous use throughout its lifetime; you can prevent this fact.
If your bed is used too much daily (night), the probability of the above problems occurring increases significantly. Fortunately, there are several ways to avoid the inevitable wear and tear of your air bed for a while. Eventually, your bed gets rid of its flaws, but these tips help you to remove the leak and keep your bed alive longer.
Tips to Improve The Life of Your Air Bed
Tip 1: Fold The Air Bed Carefully
Since this is normal, this is the last step in the processing of the bed, careful use can often be ignored. However, this is certainly one of the most important steps and must be done with precision to prolong the life of your air bed each time.
Over time, stretching the materials of the bed during the folding process will increase the likelihood of tear development. If small holes start to appear, the wrong folding will exacerbate them and cause more leakage with each use.
To avoid this, be sure to follow the folding instructions in the user manual. These steps may seem boring or pointless, but neither. It’s written in instructions to help you keep your bed as long as possible.
Tip 2: Check Room Temperature
It is always important to maintain optimal air levels in the bed. As mentioned earlier, in colder weather, the air in the bed tends to condense and the bed goes out. When the air temperature drops, the bed does not work so high and is more prone to tearing or holes.
Pay close attention to the temperature to reduce the risk of holes and tearing. Check the temperature as you fill the bed and do your best to maintain that temperature overnight.
Tip 3: Lay Your Bed Flat On The Floor
Sleeping in your bed is a simple but effective way to protect your bed. When you sit on the ends and apply all the pressure of your body to a specific part, holes and tears can occur. Lying flat on the bed during use, your body weight is evenly distributed so that your bed feels less pressure and less air leaks.
CRUIAL
The truth is, there’s nothing you can do to keep your bed from constantly leaking air. All of these beds will eventually start to leak or be drilled, regardless of the cost or materials used.
The extinguishing of your air bed can be attributed to many reasons. However, there are a few things that we outlined above that slow down the process and add a happier night’s sleep to your beds.
){kind=link}